Gravitron fully racked on a single trailer

  • Original Size 1200 x 696 pixels
  • Date Taken August 19, 2003
  • Aperture f/8.6
  • Shutter Speed 1/125 sec
  • Focal Length 18 mm
  • ISO 100
  • Camera FinePix2650

Return to Gravitron

10 Responses to “Gravitron fully racked on a single trailer”

  1. Is that OLD BLUE Conklins gravitron the brokeout a wall cuz the operator was too ignorent to realize that a will pin broke?

    Chris - January 20th, 2010 at 2:07 pm

  2. I have been seting up Gravitrons for 4 years.

    Arnie Hallum - November 19th, 2011 at 4:13 pm

  3. its a fun ride too set up you can find me on you tube at Bloomer Fair.

    Arnie Hallum - November 19th, 2011 at 4:14 pm

  4. Ive set-up and ran the grav for 7 years in Alberta, Canada. my Grav is the only I know of that has a computer controlled club lighting system and a set of dj turntables built into the console, and the worlds first to run on ‘renewable energy’.

    Crazy Bob - December 29th, 2011 at 4:00 pm

  5. Ummm… Chris. Where do you get your info from regarding safety??? Cause according to the State of Florida inspectors that INVESTIGATED the accident that is NOT how it occured. Just wondering?

    Justin - January 11th, 2012 at 2:27 am

  6. I am looking at Building a model Gravitron that would be Size acurate and looking for blueprints or setup video or photos.. ive searched for videos on youtube and it shows some walls already up not how they un fold the floor or how the inner back panels are sitting way to far back… do they pull out? and or how the arms that the tarp lays across attach to the top… so many questions and just need someone to show some light on this

    John - June 25th, 2012 at 10:44 am

  7. Googled the report the investigation found it was a wall pin breaking that caused the accident.

    Chris - September 12th, 2012 at 3:23 am

  8. Googled the report the investigation found it was a wall pin breaking that caused the accident. I also heard that it was fatigued steel that caused it but that was just hearsay the report online says it was a wall pin

    Chris - September 12th, 2012 at 3:24 am

  9. how high is this when it is travelling, i would guess around 4m high

    Daniel - October 9th, 2012 at 1:55 pm

  10. I ran a gravitron for 4 years and never seen a wall come off.

    ron - February 24th, 2013 at 1:44 pm

Leave a comment

(required)
(will not be published) (required)
Comments: